ProColor FX

Apply colors by having them flow through an airbrush at a range of 5-25psi. SSet the airbrush compressor to a lower psi when working around the eyes, lips, and ears. Painting larger surface areas can be done with a higher psi. 

ProColors can also be applied with a sponge, or brush making them a versatile liquid formula for special effects makeup artists. Use a Splatter Brush to splatter colors in their liquid state to achieve various splatter pattern effects. 

To thin the ProColor formula down, mix in our ProColor Mixing Liquid at a ratio of 1:1. Increase the durability of colors or improve pigment adhesion to prosthetics, mix in our ProColor Final Seal. 

Remove colors from the skin with HydraCleanse and a thorough cleansing with warm water. Flush colors from the airbrush by sending clear water, followed by isopropyl alcohol through the airbrush.

Use the ProColor FX colors alongside our Ultimate FX Palette to build depth and layers of colors. To bring your FX creature into the fantasy realm, consider mixing in our ProColor Shimmer colors or Lumière Luxe Powders for a pearlescent and magical glow. 

AQUA (WATER), ACRYLATES COPOLYMER, PEG-12, TALC, PROPYLENE GLYCOL, KAOLIN, POTASSIUM SORBATE, CYCLOMETHICONE, TRISODIUM HEDTA, PHENOXYETHANOL
+/- (MAY CONTAIN): CI NO. 77891, 77491, 77492, 77499, 77007, 42090, 77289, 77288, 77742, 19140, 15850, 73360 (TITANIUM DIOXIDE, IRON OXIDES, ULTRAMARINES, BLUE 1, CHROMIUM HYDROXIDE, GREEN, CHROMIUM OXIDE GREEN, MANGANESE VIOLET, YELLOW 5, RED 6, RED 7, RED 30)