ProColor Classic

Apply colors by having them flow through an airbrush at a range of 5-25psi. Set the airbrush compressor to a lower psi when working around the eyes, lips, and ears. Painting larger surface areas can be done with a higher psi. ProColors can also be applied with a sponge, or brush making them a versatile liquid formula for any face & body art makeup artist. 

To thin the ProColor formula down, mix in our ProColor Mixing Liquid at a ratio of 1:1. Increase the durability of colors or improve pigment adhesion to prosthetics, mix in our ProColor Final Seal. The Classic ProColors can achieve a pearlescent finish by mixing in our Lumiere Luxe Powders prior to application. 

Remove colors from the skin with HydraCleanse and a thorough cleansing with warm water. Flush colors from the airbrush by sending clear water, followed by isopropyl alcohol through the airbrush.

The Classic ProColor shades pair beautifully with our FX and Death shades for our creative creature and special effects artists. To achieve unique layers of colors, use the ProColor airbrush formula alongside our Alcohol Activated Palettes to build colors without the risk of smudging in the process.

AQUA (WATER), ACRYLATES COPOLYMER, PEG-12, TALC, PROPYLENE GLYCOL, KAOLIN, POTASSIUM SORBATE, CYCLOMETHICONE, TRISODIUM HEDTA, PHENOXYETHANOL
+/- (MAY CONTAIN): CI NO. 77891, 77491, 77492, 77499, 77007, 42090, 77289, 77288, 77742, 19140, 15850, 73360 (TITANIUM DIOXIDE, IRON OXIDES, ULTRAMARINES, BLUE 1, CHROMIUM HYDROXIDE GREEN, CHROMIUM OXIDE GREEN, MANGANESE VIOLET, YELLOW 5, RED 6, RED 7, RED 30)